Super MINI ELM327 Bluetooth-compatible V2.1 for Android Torque OBD 2 Interface OBD2 Scanner ELM 327 Support OBDII Protocols code reader
1.Bluetooth-compatible version —–supports Android phone/PC—-connect via Bluetooth-compatible
2.Support Android 4.0 – 4.4 version.
Note:
1.It only works with car (can not support Diesel or Truck).
2.ELM327 can do MOST of the OBDII vehicles, but it CAN NOT do all models.
3.It CAN NOT work on IOS, if you need an item which work on IOS, pls buy our WIFI ELM327.
Usually you can check the Engine Hood of the car, it is wroten /’/’OBDII Certified/’/’:
Highlights:
The newly developed wireless scan tool.
It supports almost OBD-II protocols.
It is the latest version 2.1
Bluetooth-compatible connection, no Batteries, Cables, or Switches.
Wireless (Bluetooth-compatible 5~ 10 meters
Retrieve Fault Codes (DTCs) and clear Check Engine lights.
Can also be used with a PC with a Bluetooth-compatible Card.
Functions:
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
Display current sensor data, including:
1.Engine RPM
2.Calculated Load Value
3.Coolant Temperature
4.Fuel System Status
5.Vehicle SpeedV2.1
6.Short Term Fuel Trim
7.Long Term Fuel Trim
8.Intake Manifold Pressure
9.Timing Advance
10.Intake Air Temperature
11.Air Flow Rate
12.Absolute Throttle Position
13.Oxygen sensor voltages/associated short term fuel trims
14.Fuel System status
15.Fuel Pressure
Features:
1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL (“Check Engine” light)
3.Set the maximum number of responses to obtain
4.Remove spaces from ECU responses (to speed data transmission)
5.Store a unique identifier in EEPROM
6.Set the CAN mask and filter with one command
7.Easily switch between variable and fixed CAN message lengths
8.Send CAN remote frames (RTRs)
Multi-Protocol Support:
1. ISO9141-2(5 baud init, 10.4Kbaud)
2. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
3. ISO14230-4 KWP (fast init, 10.4 Kbaud)
4. ISO15765-4 CAN (11bit ID, 500 Kbaud)
5. ISO15765-4 CAN (29bit ID, 500 Kbaud)
6. ISO15765-4 CAN (11bit ID, 250 Kbaud)
7. ISO15765-4 CAN (29bit ID, 250 Kbaud)
A.SAE J1939 CAN (29bit ID, 250*Kbaud)
B.USER1 CAN (11*bit ID, 125*Kbaud)
C.USER2 CAN (11*bit ID, 50*kbaud)
*default settings (user adjustable)
Vehicle Coverage:
Works on most of OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles .
But can’t support all OBDII cars.
If you mind this,please do not place order.Thanks.
For Alfa Romeo/ For Ad/ For Bentley/ For BMVV/ For C-adillac/ For C-hevrolet/ For Chrysl/For C-itroen/ For Daewoo/ For F-iat/ For F-ord/ For G-M/ For Hod/ For H-yundai/For Isuzu/For J-aguar/ For J-eep/ For Kia/ For Lad over/ For L-exus/ For M-azda/ For Mercury/ For Mini/ For N-isan/ For M-itsubishi/ For O-pel/ For P-eugeot/ For Posch/ For Re .nault/ For Ro ver/ For Saab/ For Seat/ For Sk-oda/ For Toyt/ For Vauxhall/ For V-olvo/ For VW
For your information:
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant
Software Included:
Scantool_net113win (Full Version)
EasyOBDII V2.2 (Free Version)
OBD2Spy (Demo Version)
Scan Master-ELM (Demo Version)
wOBDCRAZY (Demo Version)
This hardware can match much other software still! But most of them are not free!
Works for Windows98/ME/2000/XP/Vista & 7!
This tool does not match abs and airbag system!
HOW To connect the phone and use the ELM327 ?
A: On android phone : 1. Open the “setting” of your android,and search BT from ELM327:OBDll, then input password 1234. 2. Open your Torque–etting—OBD2 Adapter Settins—Connection Type—BT–back—Choose BT Device—OBDII[AA:BB:CC:11:22:33].
How to connect with the Phone and Software?
1.Android phone system requirement: Android 4.0-4.4 or higher
2.Software Installation: After insertion of ELM327 Install APP:Install—Continuous click “Next” continue the next installation—Click “Done” Install software
3.Connect Bluetooth-compatible:
1)Turn on the BT switch
2)Find “OBDII” and connect it,the password is: 1234 or 0000
3)Enter the Torque,and set the connection way:Bluetooth,then Choose BT Device: OBDII
Connection Failure selfcheck on phone:
It is based on BT 2.0,can’t support IOS (BT 4.0).Viecar 4.0 supports Android and IOS.
Please use Android System V4.0 to latest version, and so on.
1.Car is not supported.
2.Engine is not ignited.
3.You need confirm the connection way as below.
Click Menu button setting bt Connection:
Exit Torque,and re-run the software.Successful connection.
Specifications:
Type: code readers & scan tools
Output protocol:Bluetooth-compatible
Material : plastic
Voltage: 12V
Current: 45mA
Wave frequency: 38400Hz
Applicable scope: 5-10m/ 16.4-32.8ft
Item size: 4.7 * 2.3 * 3.1cm/ 1.8 * 0.9 * 1.2in
Item weight: 21g/ 0.7oz
Total weight: 34g/ 1.2oz
Packing List
A.1*EOBD / OBD2 Bluetooth-compatible Diagnostic Interface
B..1*CD.
Pictues:
